View CBTD3257D_4129409.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

INTEGRATED CIRCUITS
CBTD3257 Quad 1-of-2 multiplexer/demultiplexer with level shifting
Preliminary data 2002 Sep 09
Philips Semiconductors
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer with level shifting
CBTD3257
FEATURES
* 5 switch connection between two ports * TTL-compatible input levels * Designed to be used in level shifting applications * Minimal propagation delay through the switch * Latch-up protection exceeds 500 mA per JESD78 * ESD protection exceeds 2000 V HBM per JESD22-A114,
200 V MM per JESD22-A115 and 1000 V CDM per JESD22-C101
PIN CONFIGURATION
S 1B1 1B2 1A 2B1 2B2 2A GND 1 2 3 4 5 6 7 8 16 VCC 15 OE 14 4B1 13 4B2 12 4A 11 3B1 10 3B2 9 3A
DESCRIPTION
The CBTD3257 is a quad 1-of-2 high-speed TTL-compatible multiplexer/demultiplexer. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. Output Enable (OE) and select-control (S) inputs select the appropriate B1 and B2 outputs for the A-input data. Internal diode allows voltage level shifting from 5 V inputs to 3.3 V outputs. The CBTD3257 is characterized for operation from -40 to +85 C.
SA00533
PIN DESCRIPTION
PIN NUMBER 1 2, 3, 5, 6, 10, 11, 13, 14 4, 7, 9, 12 8 15 16 SYMBOL S 1B1, 1B2, 2B1, 2B2 3B1, 3B2 4B1, 4B2 1A, 2A, 3A, 4A GND OE VCC NAME AND FUNCTION Select-control input B outputs A inputs Ground (0 V) Output enable Positive supply voltage
ORDERING INFORMATION
PACKAGES 16-pin plastic SO 16-pin plastic SSOP 16-pin plastic SSOP (QSOP) 16-pin plastic TSSOP TEMPERATURE RANGE -40 to 85 C -40 to 85 C -40 to 85 C -40 to 85 C ORDER CODE CBTD3257D CBTD3257DB CBTD3257DS CBTD3257PW TOPSIDE MARK CBTD3257D CD3257 CBD3257 CBD3257 DWG NUMBER SOT109-1 SOT338-1 SOT519-1 SOT403-1
Standard packing quantities and other packaging data is available at www.philipslogic.com/packaging.
2002 Sep 09
2
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer with level shifting
CBTD3257
LOGIC DIAGRAM (positive logic)
1A 4 2 1B1
FUNCTION TABLE
INPUTS OE L
3 1B2
S L H X
FUNCTION A port = B1 port A port = B2 port Disconnect
L H
2A
7
5
2B1
6
2B2
3A
9
11
3B1
10
3B2
4A
12
14
4B1
13
4B2
S
1
OE
15
SA00532
2002 Sep 09
3
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer with level shifting
CBTD3257
ABSOLUTE MAXIMUM RATINGS1
SYMBOL VCC VI IK Tstg PARAMETER DC supply voltage DC input voltage2 Continuous channel current Input clamp current Storage temperature range VI/O < 0 CONDITIONS RATING -0.5 to +7.0 -0.5 to +7.0 128 -50 -65 to +150 UNIT V V mA mA C
NOTES: 1. Stresses beyond those listed may cause permanent damage to the device. These are stress ratings only and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. 2. The input and output negative-voltage ratings may be exceeded if the input and output clamp-current ratings are observed.
RECOMMENDED OPERATING CONDITIONS
SYMBOL VCC VIH VIL Tamb DC supply voltage High-level input voltage Low-level Input voltage Operating free-air temperature range PARAMETER LIMITS MIN 4.5 2.0 -- -40 MAX 5.5 -- 0.8 +85 UNIT V V V C
NOTE: 1. All unused control inputs of the device must be held at VCC or GND to ensure proper device operation.
DC ELECTRICAL CHARACTERISTICS
LIMITS SYMBOL VIK VP II ICC ICC CI CIO(OFF) O(O ) PARAMETER Input clamp voltage Pass voltage Input leakage current Quiescent supply current Additional supply current per input pin2 Control pins Power-off Power off leakage current A port B port TEST CONDITIONS VCC = 4.5 V; II = -18 mA VI = VCC = 5.5 V; I/O = -100 mA VCC = 5.5 V; VI = GND or 5.5 V VCC = 5.5 V; IO = 0, VI = VCC or GND VCC = 5.5 V, one input at 3.4 V, other inputs at VCC or GND VI= 3 V or 0 VO = 3 V or 0; OE = VCC VO = 3 V or 0; OE = VCC VCC = 4.5 V; VI = 0V; II = 64 mA ron
3
Tamb = -40 to +85 C MIN -- -- -- -- -- -- -- -- -- -- TYP1 -- See Figure 1 -- -- -- 4.5 12.5 6.5 5 5 16 1 1.5 2.5 -- -- -- 7 7 50 MAX -1.2
UNIT V A mA mA pF pF pF
On-resistance
VCC = 4.5 V; VI = 0V; II = 30 mA VCC = 4.5 V; VI = 2.4 V; II = 15 mA
NOTES: 1. All typical values are at VCC = 5 V, Tamb = 25 C. 2. This is the increase in supply current for each input that is at the specified TTL voltage level rather than VCC or GND 3. Measured by the voltage drop between the A and the B terminals at the indicated current through the switch. On-state resistance is determined by the lowest voltage of the two (A or B) terminals.
2002 Sep 09
4
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer with level shifting
CBTD3257
AC CHARACTERISTICS
Tamb = -40 to +85 C; CL = 50 pF LIMITS SYMBOL tpd tpd ten tdis PARAMETER Propagation delay1 Propagation delay Output enable time to High and Low level Output disable time from High and Low level FROM (INPUT) A or B S OE S OE S TO (OUTPUT) B or A A A or B B A or B B VCC = +5.0 V 0.5 V MIN -- 1.6 1.8 1.6 2.2 2.0 MAX 0.25 11.0 11.2 10.8 6.0 8.0 ns ns ns ns ns ns UNIT
NOTE: 1. The propagation delay is the calculated RC time constant of the typical on-state resistance of the switch and the specified load capacitance, when driven by an ideal voltage source (zero output impedance).
AC WAVEFORMS
VM = 1.5 V, VIN = GND to 3.0 V
3V 1.5 V INPUT 0V tPLH tPHL VOH 1.5 V OUTPUT VOL 1.5 V 1.5 V
TEST CIRCUIT AND WAVEFORMS
7V From Output Under Test CL = 50 pF 500 S1 Open GND 500
Load Circuit
TEST tpd tPLZ/tPZL tPHZ/tPZH
S1 open 7V open
SA00028
Waveform 1. Input to Output Propagation Delays
DEFINITIONS Load capacitance includes jig and probe capacitance; CL = see AC CHARACTERISTICS for value. 3V Output Control (Low-level enabling ) tPZL Output Waveform 1 S1 at 7 V (see Note) tPZH Output Waveform 2 S1 at Open (see Note) 1.5 V 1.5 V 0V 3.5 V 1.5 V tPHZ VOH - 0.3 V 1.5 V 0V Note: Waveform 1 is for an output with internal conditions such that the output is low except when disabled by the output control. Waveform 2 is for an output with internal conditions such that the output is high except when disabled by the output control.
SA00012
tPLZ
NOTES: 1. All input pulses are supplied by generators having the following characteristics: PRR 10 MHz, ZO = 50 , tr 2.5 ns, tf 2.5 ns. 2. The outputs are measured one at a time with one transition per measurement.
VOL + 0.3 V VOL VOH
SA00029
Waveform 2. 3-State Output Enable and Disable Times NOTES: 1. tPLZ and tPHZ are the same as tdis. 2. tPZL and tPZH are the same as ten. 3. tPLH and tPHL are the same as tpd.
2002 Sep 09
5
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer with level shifting
CBTD3257
TYPICAL CHARACTERISTICS
Temp = 85 C 3.8 3.6 3.4 VP 3.2 3.0 6 mA 12 mA 24 mA 3.0 24 mA VP 3.2 100 A 3.8 3.6 100 A Temp = 70 C
3.4 6 mA 12 mA
2.8
2.8
2.6
2.6
2.4 2.2 4.4 4.6 4.8 5.0 5.2 5.4 5.6 VCC - Supply Voltage
2.4 2.2 4.4 Temp = 25 C 3.6 100 A
4.6
4.8
5.0
5.2
5.4
5.6
VCC - Supply Voltage
3.4
3.2 6 mA VP 3.0 12 mA 24 mA 2.8
2.6
2.4
2.2 4.4 Temp = 0 C 3.6 100 A 3.4 3.2 3.2 6 mA 12 mA 3.0 VP 2.8 2.6 2.6 2.4 2.4 2.2 2.0 4.4 4.6 4.8 5.0 5.2 5.4 5.6 VCC - Supply Voltage VCC - Supply Voltage 2.2 2.0 4.4 4.6 4.8 5.0 5.2 5.4 5.6 24 mA VP 3.0 12 mA 24 mA 2.8 4.6 4.8 5.0 5.2 5.4 5.6 VCC - Supply Voltage Temp = -40 C 100 A
3.4
6 mA
SW00895
Figure 1. VOH values (Vin = VCC) 2002 Sep 09 6
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer with level shifting
CBTD3257
SO16: plastic small outline package; 16 leads; body width 3.9 mm
SOT109-1
2002 Sep 09
7
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer with level shifting
CBTD3257
SSOP16: plastic shrink small outline package; 16 leads; body width 5.3 mm
SOT338-1
2002 Sep 09
8
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer with level shifting
CBTD3257
SSOP16: plastic shrink small outline package; 16 leads; body width 3.9 mm; lead pitch 0.635 mm
SOT519-1
2002 Sep 09
9
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer with level shifting
CBTD3257
TSSOP16: plastic thin shrink small outline package; 16 leads; body width 4.4 mm
SOT403-1
2002 Sep 09
10
Philips Semiconductors
Preliminary data
Quad 1-of-2 multiplexer/demultiplexer with level shifting
CBTD3257
Data sheet status
Data sheet status [1] Objective data Preliminary data Product status [2] Development Qualification Definitions This data sheet contains data from the objective specification for product development. Philips Semiconductors reserves the right to change the specification in any manner without notice. This data sheet contains data from the preliminary specification. Supplementary data will be published at a later date. Philips Semiconductors reserves the right to change the specification without notice, in order to improve the design and supply the best possible product. This data sheet contains data from the product specification. Philips Semiconductors reserves the right to make changes at any time in order to improve the design, manufacturing and supply. Changes will be communicated according to the Customer Product/Process Change Notification (CPCN) procedure SNW-SQ-650A.
Product data
Production
[1] Please consult the most recently issued data sheet before initiating or completing a design. [2] The product status of the device(s) described in this data sheet may have changed since this data sheet was published. The latest information is available on the Internet at URL http://www.semiconductors.philips.com.
Definitions
Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 60134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
Disclaimers
Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified.
Contact information
For additional information please visit http://www.semiconductors.philips.com. Fax: +31 40 27 24825
(c) Koninklijke Philips Electronics N.V. 2002 All rights reserved. Printed in U.S.A. Date of release: 04-02
For sales offices addresses send e-mail to: sales.addresses@www.semiconductors.philips.com.
Document order number:
9397 750
Philips Semiconductors
2002 Sep 09 11

▲Up To Search▲

Price & Availability of CBTD3257D

	To Download CBTD3257D Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .